Rearranging the furniture

Rearranging the furniture

(Another New Studio)

After my last post I was thinking about the use of space in the studio and quite obviously it could be much better, so I set about moving the installation space into the corner to utilise the two existing walls rather than just one. I know this is bleedin’ obvious but I plead enthusiasm!

I decided to do this on Friday afternoon, the 2nd June, after returning from a trip away.

Rearranging the furniture

moving the installation towards the wall

The photograph above shows what I mean, the wall behind the drawing board becomes the back wall of the installation and the construction you can see on the left here is the left hand wall of the installation once you’re inside it.

The photograph below is the view from the door giving a direct view of the desk as you enter the room.

Rearranging the furniture

the view from the entrance

On Friday I couldn’t finish it all so I got back to it on Monday 5th. Below you can see view back from the desk with the extra working space created and a nice clean floor.

Rearranging the furniture

New space by the entrance

Rearranging the furniture

Corner installation

And here you can see the filled in installation walls. The projection wall is the reverse of the three 8×4 panels on the left of this picture.

Rearranging the furniture

New Projection Wall

As I freed up three complete panels with this move I was able to make the bench pictured below to use for construction and display.

Rearranging the furniture

New Construction Bench

Over the weekend I worked on some prints of images of the lemniscates that I will turn into sculpture with AR accompaniments. I made the drawings last July and you can see this post detailing them or the gallery

Drawing

I’ve continued to draw every day;

The May drawings can be seen here

and the April images here

There is a link to the previous month’s Gallery on each page.

The drawings are posted to Twitter and Instagram each day.

Circles Films

Circles Films

(Another New Studio)

Over the last fortnight I set up the installation area, for the moment a projection room, and played around with using both projectors each throwing to a different wall.

While I was playing with the projections I also produced the first piece of work I’ve made in the studio. A drawing of the birds nest I found when the neighbours trimmed the hedge.

circles films

first drawing in the new studio

A simple charcoal drawing on heavy paper. I made a polycam model of the nest itself

Then later made an AR test with the downloaded obj file. The obj, or format of your choice, can be downloaded here.

I wanted to break up the projected images in the installation and decided to make some large circles to to hang in front of the screens. The images below use a projection of the geranium project film and a new red film made from camera trap captures that came out in shades of red, played in sequence and on a loop.

Circles Films

Red Circles from the right

Circles Films

The geranium film projected onto the large circles

Doing so meant I emptied my portfolio so I displayed the Durer’s solid drawings that are in progress.

Circles Films

The Durer’s Solid drawings displayed in the studio

The video felt too small in the space and I wanted to complicate the surface so I used both projectors and set them with the films overlapping by about two thirds of their width. I added in a line of smaller circles cutting across the space.

Circles Films

Both projectors in the installation overlapping

I have a Vimeo Showcase of film snatches and a longer, 15 min film

There is a gallery page of stills from the  videos

And that’s as far as I’ve got

Another New Studio

Another New Studio

Another New studio

The empty studio

I took the plunge and moved into a new studio away from the house. It’s expensive but more professional!

I oved into the space above on Tuesday 2nd May.

Another new studio

floor covered with dpc plastic

On Wednesday 3rd May I got a roll of dpc plastic and covered the floor.

Another New Studio

Moving in Day

On Friday 5th May I moved all the stuff down to the studio in a van and started to assemble the installation that will sit in the middle of the space.

Another New Studio

A view of the studio with the installation

We’ve had a run of bank holidays, what with Charlie’s hat and so on, so I didn’t get back to the studio until Tuesday 9th May when I finished assembling the installation and a seperate space for storage.

Another New Studio

First Coat of Paint

On Thursday the 11th I managed to give all the structures a first coat of paint and set up the computer and VR headset. I needed to do some gardening on Wednesday as it wasn’t raining.

Platonics

I continued to work on the platonics app after the last post and whilst I’m not completely pleased with it I decided to put it onto the play store as a test. It’s remarkably easy and took a couple of days total. It’s a fairly involved process though so it’s worth making a list and preparing your materials. it is particularly worth creating a set of screen shots and getting your publicity materials in order before you start. It’s on as a test in that I’m not publicising it other than on here.

platonics_timaeus is now on the play store.

The website link for the images is http://ian-latham.com/timaeus/

platonics_timaeus ad

platonics_timaeus feature graphic

Most of the work I do can be seen on my website

Drawing

I’ve continued to draw every day;

The April drawings can be seen here

and the March images here

There is a link to the previous month’s Gallery on each page.

The drawings are posted to Twitter and Instagram each day.